Kitchen / Restaurant / Cold Room Shelving
shelving (Active Quartermaster 2) employs new technology to provide a
persistent and safe antibacterial surface action that can be washed many
times, in fact can be steamed cleaned. After preparing the shelf to
maximise adhesion high performance nylon is applied by immersion to
ensure a thick cote that smoothes out edges and acute internal corners,
providing a surface that is simple to wipe clean. Using new technology
the antibacterial agent is incorporated into the nylon and therefore
lasts as long as the coating, which we know can easily be over ten
Active Quartermaster2 kitchen shelving is suitable for cold room
applications down to -30°C. The coating has excellent wear performance
and has good chemical and corrosion resistance but may be cut with sharp
Kitchen Shelving - Airdeck Shelves
Airdeck kitchen shelving wire shelf forms the heart of the Quartermaster
kitchen shelving system. The open shelf and posts are designed to allow
light and air to flow freely. Weather airflow is used to cool and keep
fresh, to remove dirt and contaminants or to save valuable seconds in
detecting and containing fire, Airdeck improves performance over solid
shelving. Quartermaster 2 kitchen shelving is ideal for hygienic
environments, as it has no accessible inner voids to hide contamination.
Kitchen Shelving - Solid Shelves
Manufactured using 1.2mm
steel sheet, formed to provide a safety edge. White epoxy coated
suitable for general use in dry areas. 304 grade stainless steel is
tough for metal to metal contact, washable and is suitable for cold rooms.
Kitchen Shelving - Stainless Steel
using 304 grade stainless steel, electro-polished to remove surface
imperfections and impurities and to provide a bright finish. This
process is normally required for sterile applications. Stainless steel
shelving has a very long life even under arduous conditions and is
suitable for most environments.
Kitchen Shelving - Supporting
Shelf Supports, the two pieces of which, click and
hold in place on the required locating ring support the shelf by a wedge
action that is rigid and strong. Assembly is simple, adjustable and
fast. Shelf hooks are used to suspend shelves, this allows for space
efficient 90 degree open corners. Finishes match shelves, Note that
using hooks reduces shelf loading and can not be used with solid
Kitchen Shelving - Stability
and marine applications require additional stability. Heavy duty feet,
top ties and wall fixings, fixed and adjustable improve stability.
Kitchen Shelving - Components
The basic Quartermaster 2
kitchen shelving components, posts and shelves are designed for simple
and fast assembly. Accessories are designed to get the best from the
Posts are formed from 25.4mm tube with location
rings at 62.5mm centres. Standard posts are 1700mm high, although sizes
from 950mm to 2450mm are also stocked. Posts are fitted with black top
caps and a threaded foot insert that accepts an 8mm rigid glide foot.
15mm of adjustment is provided. Greater adjustment can be provided by
using an alternative insert and foot. Posts are finished with chrome
plate for normal applications, with an additional clear epoxy coat for
additional protection against corrosion. Stainless steel posts in mill
finish 304 grade are also available for clean or heavy wire
Framed 50mm square wire mesh retaining panels, singly or in sets fit
sides and backs of shelf units. On mobile racks panels extend above the
top shelf to retain items on the top shelf. Panel finishes match
shelves. Panels hook over top shelf and are tied on intermediate
Ledges (150mm high) are fitted to back and sides of individual shelves
to retain stock.
Shelf dividers (200mm high) can be fitted to individual shelves
providing discreet locations.
Divider rods create fixed locations within a bay of shelving. Rods are
positioned using clips or externally using rod hooks. Stocked in plate
and bright zinc.
3 sided braces are used to improve stability on 4 post units where the
bottom shelf is omitted to provide floor access for bins or trolleys.